cisco voip directory
CCIE # 22087
Thu, 18 Sep 2008 22:15:02 +0000
Yes, I passed.
Just checked the report, and will write in detail after the moment has sunk in
When using PIM Sparse in NBMA environment like Frame Relay you need to make sure you enter the ip pim nbma command to disable the split horizon rule that traffic coming into the interface is not going out that same interface.
The IP pim nbma is working only for Sparse Mode Group
Candidate RP need to be able to communicate only with the mapping agent and the Routers in the Domain need to be able to communicate with the Mapping agent so from that we can understand that we need to watch our Route to the Mapping Agent.
Ok I think I will end it here for now, I hope this was good info.
The Poor Man’s CCIE Lab Near Complete
Fri, 29 Aug 2008 18:36:28 +0000
I’ve been accumulating a bunch of equipment now for quite some time…trying to get to the point where I could finally put together a half way respectable home lab for studying. Last night I pulled an all nighter setting up most of my home lab! My goal was to replicate the IPexpert R/S topology the ...]
MPLS - The basics explained and demonstrated
Fri, 29 Aug 2008 04:36:05 +0000
I mentioned in an earlier post that I was attempting to conquer MPLS via a book called “MPLS-Enabled Applications”. This was a pretty big mistake. By the 10th page I realized that this book is not at all for MPLS noobs. At that point I stopped wasting my time and started plunking away at IE’s ...]
align="justify">
Please don't treat this as an average piece of writing on cisco voip. A lot of effort and hard work has been put to get this end product!
Recommended cisco voip Items


ccie security training
ccie qos
Labels: mpls ccie | net130 | net130















